+- Discussion Forum for all things Microbee (https://microbeetechnology.com.au/forum)
+-- Forum: Microbee Forum (https://microbeetechnology.com.au/forum/forum-1.html)
+--- Forum: Non-Microbee Vintage discussion (https://microbeetechnology.com.au/forum/forum-8.html)
+--- Thread: S2650 Line Assembler in the repository (/thread-335.html)
S2650 Line Assembler in the repository - cfbsoftware - 26-06-2021
The recent addition of the S2650 Line Assembler to the repository included the following request:
Quote: Little is known about the Line Assembler, so let us know if you have any information about it.It is not identical but is very similar to the Line Assembler described in the article 2650 mini assembler simplifies programming by Jamieson Rowe published in the April 1979 issue of Electronics Australia (pp 76 - 80) and the follow-up article Improving the 2650 mini Line Assembler by A. M. Kollosche in February 1980 (p76).
RE: S2650 Line Assembler in the repository - someone - 26-06-2021
If anyone would know I guess that Ian Binnie would!
Someone has a 2650 system but it needs some TLC to get it working again.
It uses stacked 1K RAM Sticks (8 x 2101 1Kbit RAMs).
RE: S2650 Line Assembler in the repository - ChickenMan - 26-06-2021
Fantastic, thanks for that Chris, I just checked the Repository and we already have those two articles and I just updated them with better quality PDF's.
RE: S2650 Line Assembler in the repository - griffo - 11-05-2023
Hi Chris, I'm interested in tracking down some of the old 2650 software, could you PM me when convenient.
Cheers
RE: S2650 Line Assembler in the repository - someone - 15-05-2023
(11-05-2023, 04:40 PM)griffo Wrote: Hi Chris, I'm interested in tracking down some of the old 2650 software, could you PM me when convenient.
Cheers
Have you tried MicroByte Software for the 2650 (binnie.id.au) ?
RE: S2650 Line Assembler in the repository - griffo - 10-06-2023
Hi 'someone', I did send an email to Ian Binnie's published address but got no response.
RE: S2650 Line Assembler in the repository - someone - 15-06-2023
(10-06-2023, 06:20 PM)griffo Wrote: Hi 'someone', I did send an email to Ian Binnie's published address but got no response.
That's disappointing.
The website seems stale.
Why not try contacting Ron Koenig about 2650 stuff
RE: S2650 Line Assembler in the repository - ChickenMan - 16-06-2023
I contacted Ian Binnie some years ago and helped him with some of the docs on his site. But the only software he had was whats on his site, not much.