17-01-2022, 05:03 PM
Thanks Ernest, I put the original Wordbee rom back in and PIN 26 reads +5v. So cut the 5v track going to PIN 26 on the solder side of the coreboard and connected it to PIN 1 of IC 28 as you suggested and bingo all is working. W brings up Wordbee from the main Menu now and I can select Rom 8 from the Command menu to get Survivor. So now have Space Invaders in top 1/2 of Rom E, RobotMan in top 1/2 of Rom I and Defender in all of Rom H so think I will leave it at that.
"The emulator correctly decodes the PAK 8 address, whereas the real hardware does not." I therefore read that as ubee512 doesnt emulate the real hardware correctly then.
As for not seeing the pic, can you see the Command menu pic a few line above it or not ? I've triple checked the Setup and Attachments are turned on for all, thats Guests, Members, Mods, Admin so seams Members are the only one where it doesnt work correctly. Will see if there is an update.
"The emulator correctly decodes the PAK 8 address, whereas the real hardware does not." I therefore read that as ubee512 doesnt emulate the real hardware correctly then.
As for not seeing the pic, can you see the Command menu pic a few line above it or not ? I've triple checked the Setup and Attachments are turned on for all, thats Guests, Members, Mods, Admin so seams Members are the only one where it doesnt work correctly. Will see if there is an update.
---------------------------
ChickenMan
ChickenMan