11-05-2022, 09:36 PM
Firstly, the EDASM_v42 disk is NOT bootable while both the 128k_premium disks are.
I also assume the USB key is FAT32 formatted, anything else will NOT work.
Also, are you running the BN60 boot rom in your bee or the original BN56 ?
If the Gotek has the jumper set at S0 then its setup to work as A: drive and you are using the original 34 way floppy cable and just replacing the left 5.25" A: drive with the Gotek using an adapter from 5.25" floppy to 3.5" floppy or your using a home made cable? Can you unplug the Gotek and change the B: jumper to be A: and then does it work ?
I also assume the USB key is FAT32 formatted, anything else will NOT work.
Also, are you running the BN60 boot rom in your bee or the original BN56 ?
If the Gotek has the jumper set at S0 then its setup to work as A: drive and you are using the original 34 way floppy cable and just replacing the left 5.25" A: drive with the Gotek using an adapter from 5.25" floppy to 3.5" floppy or your using a home made cable? Can you unplug the Gotek and change the B: jumper to be A: and then does it work ?
---------------------------
ChickenMan
ChickenMan