09-10-2022, 11:59 PM
Since vezza-mb needs CP/M3 to run, that basically means you can only use it on a 128k Microbee. I see you have made a version, vezza-k2, for the Kaypro 2 that appears to run on both the early 56k and CIAB (64k) Microbee's in standard CP/M2.2, except for some of the Terminal codes used. Is it possible to tweak it to run on these Microbee's even as a different version ?
This is running Vezza-K2 with BORDER ZONE on a CIAB (64k) Microbee running CP/M 2.2. As you can see, the file load and starts running but there is no CLS between to Vezza loading the z5 file and the file actually running. There are other screen issues once running also.
This is running Vezza-K2 with BORDER ZONE on a CIAB (64k) Microbee running CP/M 2.2. As you can see, the file load and starts running but there is no CLS between to Vezza loading the z5 file and the file actually running. There are other screen issues once running also.
---------------------------
ChickenMan
ChickenMan