Hi,
Yes, this is the one I swapped over for a System80 (plus exp unit).
The unit I have comes up with a block cursor on the monitor. The rear has the following ports, from left to right.... two large round holes, with "Power" stamped above them. I plug the power DIN plug into the rh side hole and the video cable into the monitor and apply pwer and it powers up ok. Next along the rear of the case is "User Port" (can't see any connector, just inside the unit), "Expansion Interface" (34 way connector), Serial Port (usual 25pin 232 D port) and IO Port (15 pin D port).
I am not familiar with what variant of kbds the Bee models had. This unit has, on the rh side, far right, top to bottom... "Back Space", next row is "Line Feed" and "Return", next row down is "Del" and "Break" keys, the next row is "Shift" and "Reset" keys. And the very bottom, in the middle, is the obligatory "space" bar. So, need to know exactly what model I have so I can go to the repository or wherever to see how to operate it and also check out any hardware and schematics, as I like that sort of thing.
I have a gotek I could use and am happy to connect it up, so I assume there is doco about on how to do that? All I have is the main unit. It does not have cursor keys. Looking for the "good stuff"... ie... user guide, tech details etc etc
Yes, this is the one I swapped over for a System80 (plus exp unit).
The unit I have comes up with a block cursor on the monitor. The rear has the following ports, from left to right.... two large round holes, with "Power" stamped above them. I plug the power DIN plug into the rh side hole and the video cable into the monitor and apply pwer and it powers up ok. Next along the rear of the case is "User Port" (can't see any connector, just inside the unit), "Expansion Interface" (34 way connector), Serial Port (usual 25pin 232 D port) and IO Port (15 pin D port).
I am not familiar with what variant of kbds the Bee models had. This unit has, on the rh side, far right, top to bottom... "Back Space", next row is "Line Feed" and "Return", next row down is "Del" and "Break" keys, the next row is "Shift" and "Reset" keys. And the very bottom, in the middle, is the obligatory "space" bar. So, need to know exactly what model I have so I can go to the repository or wherever to see how to operate it and also check out any hardware and schematics, as I like that sort of thing.
I have a gotek I could use and am happy to connect it up, so I assume there is doco about on how to do that? All I have is the main unit. It does not have cursor keys. Looking for the "good stuff"... ie... user guide, tech details etc etc