28-06-2023, 02:30 AM
Hi John, The Colour output on this board is close to the CGA standard but not quite.
There were two versions of this, one was straight TTL the other had half intensity RGB outputs.
Works with adaption through a GBS converter to VGA, also not too difficult to interface to an old RGB TV monitor.
I have successfully run on either with my Standard Microbee with a MB1217 colour board.
Let me know if you need a hand.
Ernest
There were two versions of this, one was straight TTL the other had half intensity RGB outputs.
Works with adaption through a GBS converter to VGA, also not too difficult to interface to an old RGB TV monitor.
I have successfully run on either with my Standard Microbee with a MB1217 colour board.
Let me know if you need a hand.
Ernest