21-07-2023, 01:25 PM
Thanks RedSkullDC and Ernest for your speedy AND helpful replies!
(The forums here have got me out of trouble so much!)
RedskullDC, The -12V isn't used at all in the disk units so I'll just ignore that one for now. I only need +12v and +5v. The ratings you gave me are dead on the information I needed. Nice to have the schematic for the other two that are still working though :-)
Ernest, I'm using Altronics purchased buck converters to drop the voltage on the 12v rail down to 10v for the external Microbee supply. They're nice little units, and the 5¼" drives sometime require 12V so I don't want to mess with that too much.
Cheers!
John
(The forums here have got me out of trouble so much!)
RedskullDC, The -12V isn't used at all in the disk units so I'll just ignore that one for now. I only need +12v and +5v. The ratings you gave me are dead on the information I needed. Nice to have the schematic for the other two that are still working though :-)
Ernest, I'm using Altronics purchased buck converters to drop the voltage on the 12v rail down to 10v for the external Microbee supply. They're nice little units, and the 5¼" drives sometime require 12V so I don't want to mess with that too much.
Cheers!
John
John "CheshireNoir" Parker
----
One Dark Little Kitten
----
One Dark Little Kitten