08-03-2026, 11:56 PM
The model you need to run HD on is not a p128k but a hdd.
This works fine for me
ubee512.exe hdd --hdd1=hdd_128k_sys_2.2t.hd0
The hdd_128k_sys_2.2t.hd0 is an image of the original Teac HD ( the t after 2.2) and has 4 x 2.5gb partitions as the original was only a 10gb HD.
This also works with A: to D: the HD and E: a ds40 floppy
ubee512.exe hdd --hdd1=hdd_128k_sys_1.1.hd0 --hdd3=hdd_128k_standard_1.1_ds40.dsk
This works fine for me
ubee512.exe hdd --hdd1=hdd_128k_sys_2.2t.hd0
The hdd_128k_sys_2.2t.hd0 is an image of the original Teac HD ( the t after 2.2) and has 4 x 2.5gb partitions as the original was only a 10gb HD.
This also works with A: to D: the HD and E: a ds40 floppy
ubee512.exe hdd --hdd1=hdd_128k_sys_1.1.hd0 --hdd3=hdd_128k_standard_1.1_ds40.dsk
---------------------------
ChickenMan
ChickenMan