DGOS 1.4+ Monitor has been upgraded

[ChickenMan]

Thanks to gentle1 for suppling the 3 upgraded DGOS 1.4 roms.  These are used in a DG680 S100 system with a DG640/ETI640 Video card.  Further info and discussion is in this thread DGOS 1.4+ (microbeetechnology.com.au)

These are the additional or modified DGOS 1.4 commands in the DGOS 1.4+ monitor

Commands can be upper or lowercase

B <addr>  Breakpoint
B<ret> clear breakpoint
B? display breakpoint
DD <start> <end> disassemble
DSB <addr> set breakpoint when single stepping
DCB clear breakpoint
DSW <addr> watchpoint
DKW clear watchpoint
DKB clear all breakpoints
DG continuous singlestep
N singlestep or N <addr>
ER display/mod regs <return> go to next reg ^c change
S search now includes wildcards and text string to 12 chars
E examine ^t show ascii  - M to modify when in examine
V view
DQ ?
DV display breakpoints and watch points
I <port> read port
O <port> <data> write to port
H halt clock
RF  - read tape fast 1200bd
WF  - write tape fast 1200bd
R? check tape

So the 3 ROM files plus a file list of all the additional & amended commands, as above, have been combined into the one zip file.

So in the MbeeTechRepository in the AppliedTech-Pre-Microbee\ROMs folder we placed

DGOS1.4+.zip