05-05-2022, 10:41 AM
Hi All
On the weekend I replaced a few components on my CRT and plugged in the 256TC. It powered on the lights but didn't seem to be booting, or perhaps wasn't sending a video signal. Thought I would post some images and see if anyone recognized the issue and had any suggestions of where to start looking before I just started blind testing everything.
When I first powered on I got this signal which didn't change for quite a while so I pushed the reset button the bee and got
this one, stayed like this for a while, reset button again and then
this one
Thags
On the weekend I replaced a few components on my CRT and plugged in the 256TC. It powered on the lights but didn't seem to be booting, or perhaps wasn't sending a video signal. Thought I would post some images and see if anyone recognized the issue and had any suggestions of where to start looking before I just started blind testing everything.
When I first powered on I got this signal which didn't change for quite a while so I pushed the reset button the bee and got
this one, stayed like this for a while, reset button again and then
this one
Thags